Foam Technology

The sacrifice mat from the foam expert

For the past four decades, Mayser has successfully supplied the market with custom polyurethane foam and foam molding technology.

INDUCON® is the perfect solution for your sacrifice mat needs:

Whether you use vacuum, flatbed, or vertical milling machines, INDUCON® helps facilitate accurate, effective, and safe cutting.
INDUCON®’s air permeability allows for sufficient and consistent suction from your vacuum to your material.
Different mat thicknesses provide the perfect solution for suction requirements as well as table protection.
INDUCON® can also be equipped with an air permeable adhesive to support vertical cutting tables or cutting small materials by creating additional stability between table and material.

	INDUCON S 230 in 1.0 mm	INDUCON S 230 in 2.0 mm	INDUCON S/C 230 GRIP in 1.0 mm
Basis	Polyurethane ester	Polyurethane ester	Polyurethane ester, equipped with an air-permeable acrylate adhesive coating on one side
Thickness	1.0 ± 0.1 mm	2.0 ± 0.1 mm	1.0 ± 0.1 mm
Density	230 kg/m³	230 kg/m³	270 kg/m³
Part number	2000084	2000035	2003163
Porosity	mixed cell (approx. 85 % open pores)	mixed cell (approx. 85 % open pores)	mixed cell (approx. 85 % open pores)
Color	dark gray	dark gray	dark gray
Delivery form	rolls (sleeve 76 mm) thickness: from 1.0 to 5.0 mm width: 1,030 to 1,530 mm (on request) length: roll starting at 60 per rm and a multiple thereof plates on request	rolls (sleeve 76 mm) thickness: from 1.0 to 5.0 mm width: 1,030 to 1,530 mm (on request) length: roll starting at 60 per rm and a multiple thereof plates on request	rolls (sleeve 76 mm) width: 1,000 to 1,500 mm (on request) length: 120, 240 rm